800.BUY.COIL
501 East Lake Street
Streamwood, IL  60107		  
 

Lighting Finishes

Available Now! ACA has a wide array of lighting reflector finishes in specular, semi-specular, textured, diffuse, embossed and painted surfaces to satisfy your every requirement. ACA's anodized surfaces are durable and corrosion resistant, and their optical properties remain unchanged over extended periods of time. Anodized surfaces carry a 25 year limited warranty and provide constant and reliable lighting reflector performance. Specialty finishes are also available on request- contact your ACA Sales Representative.


Click on ACA Part# to view specification sheet.

LIGHTING FINISHES

 ACA# MECHANICAL PROPERTIES (TYPICAL) FILM THICKNESS 
(INCHES)
(MICRONS)		 PHOTOMETRIC PROPERTIES
Ult
(ksi)		 Yield
(ksi)		 Elongation
%		 TR Total
Reflectance1		 Distinctness
of Image DI2		 15º2 RS Spec
Reflectance2
SPECULAR PRODUCTS                  
Super UltraBrite® 95 425OE 26 24 4 N/A 95 min 96 min 0.0 84 min
Controlled LI Specular 962
OB/AB		 26 24 4 .00009-.00013
2.3-3.3 microns		 85 min 80-90 .03 max 40-55
Premium LI Specular 909OB 26 24 4 .00005-.00007
.3-1.8 microns		 86 min 93 min .01 max 65 min
UltraBrite® 911
OB/AB		 26 24 4 .00005-.00007
.3-1.8 microns		 86 min 93 min .01 max 65 min
SEMI- SPECULAR                  
Semi- Specular LI 945AD 26 25 2 .00010-.00013
2.5-3.3 microns		 84 min 40-60 .05-.20 5-50
Semi-Specular
LI diffuse		 976AD 26 25 2 .00011-.00015
2.8-3.8 microns		 82 min 35-60 .25-.40 5-25
Textured Bright 973TB 26 24 4 .00010-.00014
2.5-3.6 microns		 86 min  55-65 / 30-45 4 - -
DIFFUSE PRODUCTS              Specular Gloss
w/g      a/g		    
UltraMatte® 912MB 24 21 5 .00005-.00007 
1.3-1.8 microns		 82 min 35-55 / 10-25 4 - -
UltraMatte®
II		 914MB 24 21 5 .00010-.00015
2.5-3.8 microns		 80 min 18-28 / 5-15 4 - -
UltraMatte®
III		 929MB 24 21 5 .00008-.00011
2.0-2.8 microns		 80 min 30-40 / 8-18 4 - -
Diffuse
LCA		 914MX 24 21 5 .00007-.00009
1.8-2.3 microns		 78 min - - -
Diffuse 929MM 24 21 5 .00010-.00015
2.5-3.8 microns		 75 min 40-60 4 - -
SPECIALTY PRODUCTS                  
Hammertone Medium 95 470/425
OE		 26 24 4 N/A 95 min 3 - - -
Hammertone Medium  475/910
OB		 26 24 4 .00005-.00015
1.3-3.8 microns		 85 min 3 - - -
Hammertone Small 458/910
OB		 26 24 4 .00005-.00015
1.3-3.8 microns		 85 min 3 - - -
Stucco 485/910
OB		 26 24 4 .00005-.00015
1.3-3.8 microns		 85 min 3 - - -
TBP Diffuser 480/480
MM		 25 23 8 .00010-.00015
2.5-3.8 microns		 72 min 3 15-30 5 - -
UltraWhite® 
HR		 493/493
MR		 25 23 8 N/A Painted 90 min - - -

1 Photometric measurement taken with Technidyne TR2
2 Photometric measurement taken with Hunter Lab Dorigon II
3 Irregular surfaces prevent accurate photometric measurements
4 Dr. Lange-Specular Gloss with and against grain, DIN 67530
5 Gardner 60º with grain

 

ACAD-083 Rev 11

 

 
Copyright © 2005 Aluminum Coil Anodizing Corp. | [Home] [Contact Us] [Site Map] [Request]